Kurzfassung: Proceedings of the NATO Advanced Research Workshop on Social Responses to Large Technical Systems: Regulation, Management, or Anticipation, Berkeley, California, October 17-21, 1989.

Kurzfassung: 1 Design and Process Considerations -- 1.1 Overview -- 1.2 Assembly Packaging -- 1.3 Component Packaging -- 1.4 The Printed Wiring Assembly -- 1.5 Assembly and Solder Process -- 1.6 Cleaning Operation -- 1.7 Summary -- References -- 2 Flux Considerations with Emphasis on Low Solids -- 2.1 Introduction -- 2.2 Specifications -- 2.3 Flux Materials -- 2.4 Application Methods -- 2.5 Monitoring Techniques -- 2.6 Process Issues -- 2.7 Nonliquid Fluxes -- 2.8 Importance of Soldering Parameters -- 2.9 Summary and Trends -- References -- 3 Solvent Defluxing of Printed Wiring Board Assemblies and Surface Mount Assemblies: Materials, Processes, and Equipment -- 3.1 The Need for Cleaning -- 3.2 The Cleaning Process -- 3.3 Testing for Cleanliness -- 3.4 Environmental Concerns of Solvents -- 3.5 Conclusion -- References -- 4 Aqueous Defluxing: Materials, Processes, and Equipment -- 4.1 Introduction -- 4.2 Design Considerations -- 4.3 Process Considerations -- 4.4 Process Qualification and Control -- 4.5 Environmental Concerns -- References -- 5 Alternative Defluxing: Materials, Processes, and Equipment -- 5.1 Introduction -- 5.2 Methods and Equipment -- 5.3 Materials -- References -- 6 Defluxing for High Reliability Applications and General Environmental Issues -- 6.1 Introduction -- 6.2 Background -- 6.3 Cleanliness Requirements -- 6.4 Cleaning Materials -- 6.5 Cleaning Equipment -- 6.6 Cleanliness Verification -- 6.7 Environmental Issues -- 6.8 The Future of Cleaning -- 6.9 Conclusions -- References.

Kurzfassung: The impetus to create this book originated from several concerns. One of these was the perceived value to the industry of a collection in one volume of a wide range of information pertinent to the reasons and techniques for de fluxing printed wiring assemblies (PWAs). This book is expected to be of use not only to those engaged in the electronics packaging industry but also to those in related fields seeking information concerning viable methods of dealing with one of the en­ vironmental issues of our time: the destruction of the ozone layer surrounding and protecting the planet with which we have been entrusted. The volume of information relative to providing PW As free of residues ad­ versely impacting operation, reliability, and life of electronic products is grow­ ing, and it will continue to expand at an accelerated rate as we seek to match our technology needs and desires with our environmental responsibilities. At the time ofthis writing, which has spanned the latter portion of 1989 and early 1990, the issue of choosing a new approach to producing PW As free of detrimental residues while using environmentally acceptable manufacturing techniques ap­ peared to be the major concern of the vast majority of those involved in the printed wiring assembly industry. To many this meant the use of different clean­ ing media and/or process or equipment enhancements; to others it meant the elimination of the need to clean through materials or process changes.

Kurzfassung: Hans Reichenbach Remembered -- Die vergessene Rezension der “allgemeinen Erkenntnislehre” Moritz Schlicks durch Hans Reichenbach — Ein Stück Philosophiegeschichte -- The Space Problem in the New Quantum Mechanics -- The Causal Relation as the Most Fundamental Fact of the World. Comments on Hans Reichenbach’s Paper: The Space Problem in the New Quantum Mechanics -- Reichenbach’s Metaphysical Picture -- Equivalent Descriptions -- Hans Reichenbach’s Vindication of Induction -- Reichenbach, Induction, and Discovery -- Causal Inference -- Causation and the Direction of Time -- How to Hunt Quantum Causes -- Creation as a Pseudo-Explanation in Current Physical Cosmology -- After Carnap -- Making Sense of Carnap’s “Aufbau” -- Die Konstruktion der Erfahrungswelt: Carnap und Husserl -- Carnap und der Physikalismus -- Carnap, the Universality of Language and Extremality Axioms -- A Theory about Logical Theories of “Expressions of the Form ‘The So and So’, where ‘The’ is in the Singular” -- Every Dogma Has Its Day -- Relevant Deduction: From Solving Paradoxes Towards a General Theory -- Carnapian Inductive Logic for Markov Chains -- Zur Geschichte der ‘Erkenntnis’.

Kurzfassung: Rudolf Carnap was born on May 18, 1891, and Hans Reichenbach on September 26 in the same year. They are two of the greatest philosophers of this century, and they are eminent representatives of what is perhaps the most powerful contemporary philosophical movement. Moreover, they founded the journal Erkenntnis. This is ample reason for presenting, on behalf of Erkenntnis, a collection of essays in honor of them and their philosophical work. I am less sure, however, whether it is a good time for resuming their philosophical impact; their work still is rather part than historical basis of the present philosophical melting-pot. Their basic philosophical theses have currently, it may seem, not so high a standing, but their impact can be seen in numerous detailed issues; they have opened or pushed forward lively fields of research which are still very actively pursued not only within philosophy, but also in many neighboring disciplines. Whatever the present balance of opinions about their philosophical ideas, there is something even more basic in their philosophy than their tenets which is as fresh, as stimulating, as exemplary as ever. I have in mind their way of philosophizing, their conception of how to do philosophy. It is always a good time for reinforcing that conception; and if this volume would manage to do so, it would fully serve its purpose.

Kurzfassung: Opening Session -- Welcome Address -- Opening Address -- Areas Where Advanced Separation Techniques are Desirable -- Review of New Extractants Potentially Applicable to the Processing of Radioactive Liquid Wastes (Summary) -- The Truex Process: A Vital Tool for Disposal of U.S. Defense Nuclear Waste -- Session I Amines/Amides Based Extractants -- Highly Selective and Micellar Extraction of Uranyl and Alkaline-Earth Cations (Summary) -- Extraction of Metal Ions by Neutral ?-Diphosphoramides -- Treatment of Nuclear Waste Solutions Using A New Class of Extractants: Pentaalkyl Propane Diamides -- Research for Actinides Extractants from Various Wastes -- N,N Dialkylaliphatic Amides as Extractant of Platinum Group Metals -- Session II Bidentate Organophosphorus Extractants -- Application of the Teseo Process for Actinide Removal from Liquid Alpha Wastes Generated During UO2-PuO2 Fuel Fabrication Campaigns -- Separation of AM, EU and CE from Liquid Wastes with CMPO by Extraction Chromatography -- The Extraction of Actinides and Other Constituents from Highly Active Waste (HAW) by Trialkyl Phosphine Oxide (TRPO) -- Actinides Removal by Means of Octyl(Phenyl)-N,N-Diisobutyl Carbamoyl Methyl Phosphine Oxide (CMPO) Sorbed on Silica -- Application of the CMPO Extractant (Supported Liquid Membrane) for the Alpha Decontamination of Marcoule Reprocessing Concentrate -- Comparison Between CMPO and DHDECMP for Alpha Decontamination of Radioactive Liquid Waste -- Application of CMPO Containing Gels to Metal Extraction -- Session III The Calixarenes -- Potential Industrial Applications of Calixarenes -- Special Calixarenes, Synthesis and Properties -- Calixspherands as Ligands for the Complexation of Radioactive Rubidium-81 -- Research Activities on Calixarenes (Summary) -- Session IV The Crown-Ethers -- General Properties of Crown-Ethers and Their Potential for Applications in Analytical and Preparative Chemistry -- Possible Applications of Crown-Ethers to Metal Extraction Using Liquid Membrane Technology a Literature Survey -- Application of Crown-Ethers to Caesium and Strontium Removal from Marcoule Reprocessing Concentrate -- Session V Other Types of Extractants -- Synthesis of Macrocyclic Ligands and Their Application in the Separation of Rare Earths -- Separation of Actinides with Alkylpyridinium Nitrates -- Phosphonomethyl Substituted Phenols A New Class of Absorbers and Extractants for Metals -- Actinide Separations by High Pressure Cation Exchange — The Neptunium Case -- Separation of Metal Ions by Complexation-Ultrafiltration -- Session VI Inorganic Ion Exchangers/Absorbers -- Preparation and Properties of Hexacyanoferrates for the Removal of Caesium from Radioactive Waste Streams: A Review -- The Combination of Finely Divided Inorganic Ion Exchangers and Ultrafiltration for the Treatment of Low- and Medium-Level Waste -- Use of Hydrated Antimony Pentoxide (HAP) for Fission Product Removal from Irradiated U Solutions: Application to A Homogeneous Reactor Fuel Reprocessing -- Caesium Decontamination from MTR Waste Solution -- Selective ion Exchange for Chromium Recovery from Tannery Wastes -- Novel Organic, Inorganic and Modified Inorganic Materials for Waste Treatment -- The Eix Process for Radioactive Waste Treatment -- Conclusions -- Main Achievements of the Seminar -- List of Participants -- Index of Authors.

Kurzfassung: The purpose of this technical seminar was to evaluate the present state of the art in matter of advanced separation techniques like solvent extraction, ion-exchange, chemical precipitation, membrane and electrical processes for the treatment of radioactive liquid waste and a selection of some specific industrial non-radioactive effluents. Through this initiative, the organisers aimed at promoting the exchange of information between scientists from various origins (universities, research centres and industries) while contributing to the necessary overcoming of the artificial barriers which too often limit the "technology transfer" between the nuclear and non-nuclear sectors. Vll CONTENTS PREFACE ........................................ V ABBREVIATIONS ...................................... xiv OPENING SESSION WELCOME ADDRESS C. MANCINI (ENEA) .................................... 3 OPENING ADDRESS S. FINZI (CEC) ....................................... 7 AREAS WHERE ADVANCED SEPARATION TECHNIQUES ARE DESIRABLE G. GROSSI (ENEA), L. CECILLE (CEC) ....................... 11 REVIEW OF NEW EXTRACT ANTS POTENTIALLY APPLICABLE TO THE PROCESSING OF RADIOACTIVE LIQUID WASTES (Summary) P.R. DANESI, International Atomic Energy Agency, Vienna, Austria . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 . . . . . . . . . .

Kurzfassung: 1 Introduction: cell—cell signalling by cytoplasmic bridges -- 2 The first messengers — hormones, neurotransmitters and local mediators -- 3 Structure and biosynthesis of first messengers -- 4 Ionic homeostasis and nervous conduction -- 5 Cell biology of first messenger synthesis and secretion -- 6 Cell surface receptors — analysis and identification -- 7 Cell surface receptors — signal transduction -- 8 Cell surface receptors — protein phosphorylation and other intracellular events -- 9 Regulation of cell proliferation and cancer -- 10 Signal transduction by nuclear receptors.

Kurzfassung: The central theme of this book is that systems of cell-cell signalling via nerves, hormones, local mediators and growth factors are not distinct phenomena, but branches of one general mechanism. These topics therefore can and should be discussed in an integrated manner, and the division of cell signalling studies into separate pigeonholes such as neuroscience, endocrinology or cancer biology is unnecessary, if not counterproductive. I also believe it to be unfortunate that there is not a collective term to describe neurotransmitters, hormones, local mediators and growth factors, other than clumsy phrases such as "extracellular signal molecule". The lack of a short and distinctive word for these entities genuinely hampers people from thinking about them in an integrated way. Having decided that it was presumptuous to invent a new term, I have chosen in this book the term first messenger to cover all types of extracellular signal molecule, because of the widespread acceptance of the term second messenger to represent the intracellular signal molecules that are produced in response to many of them. I have given the book the title "biochemical messengers", which is a global term to cover both first and second messengers. The impetus for writing the book came, as must often be the case, when I had to put together a course on cell-cell signalling for biochemistry students at the University of Dundee.

Kurzfassung: One Life-history Strategies -- 1 The life strategies of mites -- 2 Life-history evolution of spider mites -- 3 Life-cycle strategies in unpredictably varying environments: genetic adaptations in a colonizing mite -- 4 The evolutionary transformation of osmotic regulation in the life cycle of freshwater mites (Hydrachnidia) -- 5 Development and life-history strategies in mussel mites (Hydrachnellae: Unionicolidae) -- Two Reproduction -- 6 Spermatology in the Acari: systematic and functional implications -- 7 The distribution, mechanisms and evolutionary significance of parthenogenesis in oribatid mites -- 8 Indirect sperm transfer in prostigmatic mites from a phylogenetic viewpoint -- 9 Spermatophore deposition in relation to atmospheric humidity among terrestrial Parasitengonae (Prostigmata) -- 10 The role of Adlerocystis sp. in the reproduction of argasid ticks -- 11 A scanning electron-microscopy study of spermatogenesis in Pergamasus barbarus Berl. (Gamasida -- 12 Precise sex-ratio control in the pseudo-arrhenotokous phytoseiid mite, Typhlodromus occidentalis Nesbitt -- 13 Sex ratio, fitness and capacity for population increase in Pyemotes tritici (L.-F. and M.) (Pyemotidae) -- 14 Preliminary observations of ovoviviparity in the gallforming mite, Aceria caulobius (Nal.) (Eriophyidea: Eriophyidae) -- 15 Laboratory observations on duration of copulation and egg production of three phytoseiid species fed on pollen -- 16 Precopulatory mate guarding in the spider mite, Tetranychus cinnabarinus (Boisd.) (Tetranychidae) -- Three Diapause, Development and Trophic Relations -- 17 Physiological aspects of diapause in plant-inhabiting mites -- 18 Repeated induction and termination of diapause in the predacious mite, Amblyseius potentillae (Garman) (Phytoseiidae) -- 19 Inheritance of photoperiodic responses controlling diapause in the two-spotted spider mite, Tetranychus urticae Koch -- 20 Some observations on diapause in winter eggs of Panonychus ulmi (Koch) (Tetranychidae) -- 21 Reproduction, embryonic and postembryonic development of Trichouropoda obscurasimilis Hirschmann and Zirngiebl-Nicol 1961 (Anactinotrichida: Uropodina) -- 22 Resource allocation and utilization contrasts in Hypoaspis aculeifer (Can.) and Alliphis halleri (G. and R. Can.) (Mesostigmata) with emphasis on food source -- 23 The influence of different host plants on the reproductive potential of Tyrophagus putrescentiae (Schrank) and Tyrophagus neiswanderi Johnston and Bruce (Acaridae) -- 24 The relationship between house-dust mites and fungi -- 25 How plants maintain body-guards: plant exudate as a food source for phytoseiid mites -- Four Systematic, Morphology, Physiology and Behaviour -- 26 Distribution of characters and phylogenetic age — systematic problems in the higher taxa of the Oribatida -- 27 A new approach to the systematics of the genus Steganacarus (Oribatida) -- 28 The morphology of the immature stages of Phthiracaroidea (Oribatida) -- 29 A new interpretation of the epimeral theory of Grandjean -- 30 A comparison of the sclerotized parts of the reproductive organs of house-dust mites of the genus Dermatophagoides using scanning electron microscopy -- 31 Reproductive systems in Acaridida — some peculiar features -- 32 A respiratory apparatus in eggs of certain mites -- 33 Fine structure and functions of the mouthparts involved in the feeding mechanisms in Cenopalpus pulcher (Canestrini and Fanzago) (Tetranychoidea: Tenuipalpidae) -- 34 The alveolar salivary glands of the active phases of trombiculid mites (Trombiculidae) -- 35 Pigmentation in water mites of the genera Limnochares Latr. and Hydrodroma Koch (Hydrachnidia) -- 36 Biomass studies of water mites of the genera Limnochares Latr. and Hydrodroma Koch (Hydrachnidia) -- 37 The saltatory capacity of an oribatid mite -- 38 Thanatosis or feigning death in mites of the family Scutacaridae -- Five Field Studies and Applied Aspects -- 39 The effects of spider-mite feeding on plant performance in relation to biological control -- 40 Dispersion indices and constant precision sampling programmes for Panonychus ulmi (Koch) and Amblyseius andersoni (Chant) in Spanish apple orchards -- 41 Herbicides and the reproduction of Tetranychus urticae Koch -- 42 Phytoseiid mites associated with vines in Sicilian vineyards -- 43 Studies on mites associated with lucerne in Greece -- 44 Vertical distribution and life stages of oribatid communities on beech trees -- 45 Histiostoma murchiei Hughes and Jackson (Anoetidae) as a parasite in the cocoons of some Danish earthworms -- 46 Rearing deutonymphs of Iphidosoma fimetarium (J. Müller), a mesostigmatic mite associated with carabid beetles -- 47 Mites of the House mouse, Mus musculus L., in the north-eastern part of the Iberian Peninsula in Spain -- 48 Records of Ixodoidea from the Trentino-Alto Adige region in northern Italy -- 49 Seasonal and spatial variation in food intake by the oribatid mites of beech woodland soil -- 50 The effects of ploughing and rotary cultivation on soil mites with particular reference to the Mesostigmata -- 51 The influence of soil cultivation methods on the edaphic fauna, and especially the Gamasina (Mesostigmata), in two southern German vineyards with different cultural treatments -- 52 The density of Tarsonemida in cropped arable soil in relation to fertilizer and crop-protection treatments -- 53 Soil mites and acidification: a comparative study of four forest stands near Heidelberg -- 54 Reactions of mite populations to the influence of environmental chemicals in a beech-wood floor -- 55 Population studies on the house-dust mite. Euroglyphus maynei (Cooreman 1950) (Pyroglyphidae) -- 56 Management of mite development in the home -- 57 An indirect effect of cleaning on house-dust mites. (Dermatophagoides spp.) in carpets -- 58 Astigmatic and prostigmatic mites of grain stores, mills and sawmills in Finland -- Index to plant genera and species -- Index to animal genera and species -- Author index.

Kurzfassung: During the Inaugural Meeting of the European Association of Acarol­ ogists (EURAAC), held in Amsterdam in 1987, it was decided that the holding of a Symposium at regular intervals should be a major objective. With this in view, it was agreed that Professor Reinhart Schuster, the senior editor, be invited to accept the Presidency of the Association and, arising from that Office, to organize the first Symposium in Austria in 1988. There was strong support for a main theme focused on a particular aspect of acarology. From these discussions there emerged the proposal that emphasis be placed on aspects of reproduction, development and life-history strategies of the Acari. These were topics in the forefront of the discipline with exciting developments of interest not only to acarologists but to a wider audience because of the light they cast on fundamental processes in physiology, ecology and evolutionary biology. The object then was to invite a small number of key workers to present extended papers related to the main theme. There were seven of these all of which appear in the book. The remaining 51 contributions were offered papers a number of which fit within the framework of the Symposium theme.

Kurzfassung: 1 Maintenance policies -- 2 Organization of maintenance operations -- 3 Behaviour of physical equipment in service -- 4 Management of maintenance operations -- 5 Mathematics for maintenance: basic concepts and tools -- 6 Applications: case studies -- Exercises -- Annexe -- Maintenance software suppliers.

Kurzfassung: As the developments in engineering production techniques have resulted in an increasing dependence on automation, the increasing complexity of these systems has made the reliability of the machines a matter of great importance. An unexpected breakdown can be a very expensive experience for the company. Further, in the aerospace industry, problems of reliability, maintainability and availability are critical. For a long time industrial research and training centres have been interested primarily in the problems of design, manufacture and production; recently, however, there has been a growing interest in the study of maintenance and reliability. The concept of maintainability, for example, first appeared in 1954 in the US army. Since then a variety of techniques and methodologies have been developed and implemented to meet the challenge of the new needs. The aim of this book is to present these methods and investigate their effectiveness, and in so doing to help practising engineers gain a better understanding of the problems. The many examples and applications given here should make it a valuable teaching aid to students taking courses in engineering maintenance. This second edition has been revised and enlarged to take account of the most recent developments and illustrate their application to the solution of problems. It should also help to orient the reader to the modern concept of computer-aided maintenance. Introduction A maintenance service exists to keep equipment in running order and also to reduce the number of breakdowns.

Kurzfassung: I -- Philosophy: Sections 86–93 (pp. 405–35) of the so-called “Big Typescript” (Catalog Number 213) -- Tautology: How not to Use a Word -- The Philosophy of Logical Wholism -- Wittgenstein’s Philosophies of Mathematics -- Wittgenstein on 2, 2, 2…: The Opening of Remarks on the Foundations of Mathematics -- An Impatient Man and his Papers -- The “Middle Wittgenstein”: From Logical Atomism to Practical Holism -- The Development of Wittgenstein’s Views about the Other Minds Problem -- Philosophy in the Big Typescript: Philosophy as Trivial -- Wittgenstein’s Account of Rule-Following -- Wittgenstein and “Mad Pain” -- Moore’s Paradox Revisited -- Elements of a Wittgensteinian Philosophy of the Human Sciences.

Kurzfassung: Most of the papers appearing in volume 87 numbers, 1-2 are based on papers presented at the Colloquium on the Philosophy of Ludwig Wittgenstein held at the Department of Philosophy at Florida State University on 7-8 April 1989. We owe warm thanks to Florida State University for generously supporting this colloquium. The English translation of the chapter entitled 'Philosophie', from Wittgenstein's typescript number 213 (von Wright), appears here with permission of Wittgenstein's literary heirs, without affecting existing copyrights. The original German version of this chapter was edited by Heikki Nyman and appeared in Revue Internationale de Philosophie 43 (1989), pp. 175-203. Jaakko Hintikka's article (87, No.2) first appeared in a shorter form in The Times Literary Supplement No. 4565 (28 September to 4 October 1990, p. 1030). The present version appears with the permis­ sion of The Times Literary Supplement, which is gratefully acknowl­ edged. Our thanks are due to all the participants of the colloquium and the contributors to these special numbers.

Kurzfassung: 1 Getting started -- 2 Passive circuits -- 3 Introducing active devices -- 4 File and analysis features -- 5 Output options -- 6 Multivalued resistors -- 7 Circuit waveforms and frequency response: Nyquist plot -- 8 Linear circuits: square waves and step functions -- 9 Non-linear circuits and waveform shaping -- Appendix A Control codes -- Appendix B HSpice Discrete Components library -- Appendix C Answers.

Kurzfassung: After many years of teaching circuit theory and analogue electronic circuits the author believes that for most students the main path to obtaining a good understanding of the principles involved, as measured by their ability to apply them in a correct and intelligent manner, is through problem solving and design exercises. In an ideal world the student would be able to construct the circuit being analysed or designed, and so directly test the calculated or pre­ dicted results. Indeed, experience leads to the conclusion that typical students like to see their own circuits perform as intended, with a con­ sequent increase in motivation. At present, however, time and facility constraints mean that most of this work is of the pencil and paper variety, students having few opportunities to see the consequences of their efforts in a practical situation. At best they have to accept sample solutions or simply num­ erical answers. This path can seem tedious to all but the most motivated of students, so an alternative which can provide many of the benefits of direct circuit testing within the time and resources available is of im­ mediate interest. This is where the MINNIE and HSpice simulation package can assist the undergraduate teaching activity.

Kurzfassung: 1 Introduction to the electronics industry -- 1.1 A history of the electronics industry -- 1.2 The electronics market -- 1.3 Electronics manufacturing company structure -- 1.4 Test engineering and quality assurance -- 2 Electronic components -- 2.1 Component interconnection methods -- 2.2 Electronic components -- 2.3 Component packaging -- 2.4 Cabling -- 2.5 Component quality assurance -- 3 Electronic design -- 3.1 Quality and reliability assessment -- 3.2 The product design process -- 3.3 Circuit design -- 3.4 Integrated circuit design -- 3.5 Circuit layout -- 4 Semiconductor device manufacture -- 4.1 Semiconductor materials -- 4.2 Clean room requirements -- 4.3 Silicon wafer manufacture -- 4.4 Photolithography -- 4.5 Layer fabrication processes -- 4.6 Bipolar junction transistor fabrication -- 4.7 Field effect transistor fabrication -- 4.8 Integrated circuit packaging and testing -- 5 Printed circuit board manufacture -- 5.1 Printed circuit board types -- 5.2 Printed circuit board substrate materials -- 5.3 Printed circuit board substrate manufacture -- 5.4 Printed circuit board fabrication procedures -- 5.5 Single-sided printed circuit board manufacture -- 5.6 Double-sided printed circuit board manufacture -- 5.7 Multilayer printed circuit board manufacture -- 6 Printed circuit board assembly -- 6.1 Hand assembly -- 6.2 Automatic component insertion -- 6.3 Assembly-related faults -- 6.4 Soldering techniques -- 6.5 Solder joint inspection and common soldering faults -- 6.6 Cleaning -- 6.7 Testing and reworking -- 7 Surface mount component assembly -- 7.1 Advantages of surface mount components -- 7.2 Surface mount component assembly -- 7.3 Adhesive application -- 7.4 Solder paste application -- 7.5 Component onsertion -- 7.6 Soldering techniques -- 7.7 Mixing surface mount with leaded components -- 7.8 Soldering quality -- 7.9 Testing -- 7.10 Reworking -- 8 Alternative technologies -- 8.1 Hybrid technology -- 8.2 Tape automated bonding -- 8.3 Silicon on silicon wafer-scale integration -- 8.4 Application-specific integrated circuits -- 8.5 Flexible circuits -- References -- Further reading.

Kurzfassung: The sequence of events which led to the writing of this book started at a seminar on Manufacturing Technology in the Electronics Industry given by the Institution of Production Engineers in 1987. The seminar identified that the field of manufacturing engineering for the electronics industry was effectively missing from the vast majority of production engineering degree courses. The reason for this was that production engineering departments typically spring from mechanical engineering departments. This leads to a mechanical bias in the practical aspects of such courses. The consequence of this was that electronics companies could not recruit graduates with both relevant production engineering and electronic engineering backgrounds. This necessitated either recruiting production engineering graduates and giving them the necessary electronic engineering training, or giving production engineering training to electronic engineering graduates. A consequence of the lack of courses in a subject is that there is also a lack of relevant textbooks in the area, as most textbooks are intended to tie into courses. In the field of manufacturing technology for the electronics industry, existing textbooks tend to be highly specialized and mainly concerned with the fabrication of semiconductor devices.

Kurzfassung: 1 Introduction -- 1.1 Background -- 1.2 Structure and properties of plastics -- 1.3 Additives -- 1.4 Processing of plastics -- 1.5 Practical methods of processing -- 1.6 Interactions between shaping process and plastics materials -- Further reading -- 2 Fundamentals of design -- 2.1 Engineering design -- 2.2 Design limitations imposed by processing method -- 2.3 Product design -- 2.4 Importance of economics of processing in design -- Further reading -- 3 Styrene plastics -- 3.1 Polystyrene -- 3.2 High impact polystyrene -- 3.3 Styrene copolymers -- 3.4 ABS plastics -- 3.5 Polystyrene—poly(phenylene oxide) blends -- 4 Other amorphous thermoplastics -- 4.1 Poly(methyl methacrylate) -- 4.2 Cellulose plastics -- 4.3 Polycarbonates -- 5 Propylene plastics -- 5.1 Homopolymer and impact-modified grades -- 5.2 Filled polypropylene -- 5.3 Foamed polypropylene -- 5.4 Miscellaneous applications of propylene polymers -- 6 Other polyolefin plastics -- 6.1 Polyethylene -- 6.2 Ethylene copolymers -- 6.3 Polybut-1-ene -- 6.4 Poly-4-methylpent-1-ene -- 7 Other crystalline thermoplastics -- 7.1 Polyamides -- 7.2 Thermoplastic polyesters -- 7.3 Polyacetals -- 8 Vinyl chloride plastics -- 8.1 Unplasticized poly(vinyl chloride) -- 8.2 Plasticized poly(vinyl chloride) -- 8.3 Vinyl chloride copolymers -- 8.4 Blends of poly(vinyl chloride) -- 8.5 Vinylidene chloride polymers and copolymers -- 9 Speciality thermoplastics -- 9.1 Fluoroplastics -- 9.2 Polysulphones -- 9.3 Poly(phenylene sulphide) -- 10 Cross-linked plastics -- 10.1 Introduction -- 10.2 Phenol-formaldehyde plastics -- 10.3 Urea-formaldehyde plastics -- 10.4 Melamine-formaldehyde plastics -- 10.5 Unsaturated polyester resins -- 10.6 Epoxide resins -- 11 Polyurethane plastics -- 11.1 Introduction -- 11.2 Molecular structure—property relationships -- 11.3 Properties and applications of polyurethanes -- Further reading.

Kurzfassung: Plastics are part of everyday life and contribute immensely to the benefit of humanity. When failures occur, they are due in part either to inferior properties (resulting from poor design or badly controlled processing), or to an incomplete understanding of the properties and applications of plastics materials. Since publication of the first edition, the plastics industry has increas­ ingly adopted advanced business procedures and automation (such as closed loop control and robotics), to combat the effects of recession, and has moved increasingly towards methods based on sound scientific and technological principles. Plastics have increasingly been used in appli­ cations once dominated by the use of metals and ceramics. For instance, in the automotive industry, the modern car now contains a much higher proportion of polymers, including commodity plastics and more spec­ ialized materials. In addition, compact discs are being made from new injection-moulding grades of polycarbonate, which meet the requirements of a demanding process. This second edition has been thoroughly revised and extended to include new materials, technologies and design concepts. Chapters on thermoplastics reflect the development of polymer blends and alloys, whilst the chapters devoted to thermosets have been reorganized to accommodate the renaissance in the applications of phenolics and to cover the growing importance of polyurethanes. The related two­ component process technologies are now included; having undergone major developments in the last decade, they have become important shaping processes.

Kurzfassung: 1 Representation of Mine Data -- 1.1 Introduction -- 1.2 Mine nomenclature -- 1.3 Subdivision of orebodies -- 1.4 Mine sections -- 1.5 Mine plans -- 1.6 Vertical longitudinal projections -- 1.7 Structure contour plans -- 1.8 Connolly diagrams -- 1.9 Dip contour maps -- 1.10 Structural unrolling — Palinspastic maps -- 1.11 2D and 3D block models -- 1.12 3D orebody projections -- 1.13 Histograms and cumulative frequency plots -- 1.14 Rose diagrams -- 1.15 Stereographic projections -- 1.16 Computer software -- 2 Mine Sampling -- 2.1 Introduction -- 2.2 Characterization of mineral deposits for sampling purposes -- 2.3 Grade elevation -- 2.4 Possible locations for underground sampling -- 2.5 Channel sampling -- 2.6 Chip sampling -- 2.7 Grab sampling -- 2.8 Percussion/blast-hole sampling -- 2.9 Diamond drill sampling -- 2.10 Prospect sampling -- 2.11 Continuous sampling for open-pit operations -- 2.12 Sampling of unconsolidated surficial deposits -- 2.13 The application of copper-sensitive paints -- 2.14 Grade analysis by fluorescence and spectrometric techniques -- 2.15 Sampling theory -- 2.16 Bulk sampling of gold ores -- 3 Ore-Reserves by ‘Classical Methods’ -- 3.1 Introduction -- 3.2 Classification of reserves and resources -- 3.3 Determination of potentially economic intersections -- 3.4 Mine/deposit reserves -- 3.5 Statistical estimators of grade -- 3.6 Ore-reserves by panel/section methods (underground operations) -- 3.7 Ore reserves by triangulation -- 3.8 Ore reserves by polygons -- 3.9 Ore reserves by block matrices -- 3.10 Contour methods -- 3.11 Inverse distance weighting methods (IDW) -- 3.12 Orebody modelling using IDW methods -- Appendix 3.1 USBM/USGS Classification of Resources and Reserves -- Appendix 3.2 APEO Classification of Reserves -- Appendix 3.3 AIMM/AMIC Classification of Resources and Reserves -- Appendix 3.4 Coal Resources and Reserves -- Appendix 3.5 Ore reserve calculation — worked example -- Appendix 3.6 Program listing for SGORE -- 4 Geostatistical Ore-Reserve Estimation -- 4.1 Introduction -- 4.2 The application of geostatistics -- 4.3 The theory of regionalized variables -- 4.4 Regularization and orebody subdivision -- 4.5 Production of the semi-variogram -- 4.6 Semi-variogram models -- 4.7 Semi-variogram phenomena in the spherical scheme -- 4.8 Model fitting in the spherical scheme -- 4.9 1D regularization (spherical scheme) -- 4.10 Block reserve estimates by kriging -- 4.11 Global reserve evaluation by kriging -- 4.12 Grade—tonnage curve -- 4.13 Kriging variances and ore-reserve classification -- 4.14 Extension variances in the spherical scheme -- 4.15 Volume—variance relationship -- 4.16 Indicator kriging (IK) -- Appendix 4.1 Determination of confidence limits for log-transformed data -- Appendix 4.2 Worked example — de Wijsian scheme -- Appendix 4.3 Mathematical basis of point kriging -- Appendix 4.4 Mathematical basis of block kriging -- Appendix 4.5 Extension variance graphs and tables for the spherical scheme -- 5 Design and Evaluation of Open-Pit Operations -- 5.1 Introduction -- 5.2 Design of open-pit operations -- 5.3 Evaluation of open-pit operations -- 5.4 Economic optimization of pit designs -- 6 Financing and Financial Evaluation of Mining Projects -- 6.1 Introduction -- 6.2 Financial aspects unique to mining projects -- 6.3 Capitalization of mining projects -- 6.4 Financial model of a mining project -- 6.5 Financial evaluation techniques -- 7 Grade Control -- 7.1 Introduction -- 7.2 Open-pit operations -- 7.3 Underground operations -- 8 Ore-Evaluation Case Histories -- 8.1 Introduction -- 8.2 Case history — White Pine Copper Mine, Michigan, USA -- 8.3 Case history — Evaluation of the J-M Pt-Pd Reef, Stillwater, Montana -- 8.4 Case history — East Ore Zone, Teck-Corona Gold Mine, Hemlo Canada -- 8.5 Case history — opencast coal mining in South Wales (R. MacCallum — British Coal) -- 8.6 Case history — Boulby Potash Mine, Cleveland, UK -- 8.7 Case history — exploration and evaluation of a glacial sand and gravel deposit (P. Brewer and P. Morse — Tarmac Roadstone, Northwest Limited) -- 8.8 Case history — limestone aggregates — The Tytherington Limestone Quarries, ARC Ltd -- 8.9 Cement — Cement Quality Limestones at Los Cedros, Venezuela (Blue Circle Industries PLC) -- 8.10 Case history — Navan Zn-Pb Mine, Eire (Tara Mines Ltd).

Kurzfassung: Although aspects of mineral deposit evaluation advantages and disadvantages of each technique are covered in such texts as McKinstry (1948), so that a judgement can be made as to their Peters (1978), Reedman (1979) and Barnes applicability to a particular deposit and the min­ (1980), no widely available in-depth treatment of ing method proposed or used. Too often, a lack the subject has been presented. It is thus the of this expertise results in the ore-reserve calcula­ intention of the present book to produce a text tion being undertaken at head-office or, indeed, by the survey department on the mine, and being which is suitable for both undergraduate and treated as a 'number crunching' or geometric postgraduate students of mining geology and exercise divorced from geology. It is essential mining engineering and which, at the same time, that mine ore-reserves are calculated at the mine is of use to those already following a professional by those geologists who are most closely associ­ career in the mining industry. An attempt has ated with the local geology and who are thus best been made to present the material in such a way able to influence and/or constrain the calculation.

Kurzfassung: 1 In the Abyss of Time -- 1 In the beginning -- 2 The beginning of life -- 3 The Archaean planet -- 2 The Occupation of the Planet -- 4 The variety of life -- 5 Life in the Archaean -- 6 The surface of the Proterozoic Earth -- 7 The birth of the eukaryotes -- 3 The Spread of the Eukaryotes -- 8 The early Palaeozoic explosion and its aftermath -- 9 The changing land -- 10 The rule of the reptiles -- 4 The Modern World -- 11 The new world -- 12 Humanity -- 13 Inhabiting an island.

Kurzfassung: Life has shaped the Earth, and the Earth has moulded the history of life. That history, the co-evolution of our ancestors and their horne, has much to teach us about our place on the planet today. We are part of the fabric of the biosphere. As we change that fabric we would be wise to understand how our horne was built. Our planet is neither a hotel nor a colony. It is not a place which life briefly inhabits during a transient occupation. Instead, it is our horne, designed by the deeds of our ancestors and suited to our own needs. The history of life on Earth is held in the geological record, which is composed of the rocks, water and air that are available for study on the planet's surface. These rocks, the oceans and the atmosphere are not simply stores of information for the excitement of fossil hunters and geochemists, or resources to exploit without thought. Their cre­ ation and continued existence form an integral part of the development and management of the Earth as the horne of life.

Kurzfassung: Simulation-oriented scenarios -- Politics and administration during a ‘nuclear-political’crisis -- Comments on ‘The Chernobyl disaster and nuclear fallout’ -- The Zeebrugge ferry disaster. Elements of a communication and information processes scenario -- Comments on “The Zeebrugge ferry disaster” -- Riots without killings. Policy learning in Amsterdam 1980–1985 -- Comments on “Riots without killings” -- Interactive simulation and crisis management training. New techniques for improving performance -- Comments on “Interactive simulation and crisis management training” -- Decision pathways from crisis. A contingency-theory simulation heuristic for the Challenger Shuttle disaster (1983–1988) -- Contributors.

Kurzfassung: Journal of Personnel Evaluation in Education -- Research-Based Teacher Evaluation: A Response to Scriven -- Can Research-Based Teacher Evaluation Be Saved? -- Research-Based Indicators: Is the Glass Half-Full or Half-Empty? -- The Use of Rating Scales in Teacher Evaluation: Concerns and Recommendations -- New Sources for Improving Instruction: The Implicit Skills Study -- At-Risk and Expert Teachers: Some Thoughts About Their Evaluation -- Is Teaching a Profession: How Would We Know? -- Supervisor Bashing: Round 1.

Kurzfassung: 1 Reliability -- 1.1 Introduction -- 1.2 What is Reliability? Why Want Reliability? Principles of Achieving Reliability -- 1.3 Quantifying Reliability -- 1.4 The Methods of Systems Reliability Synthesis -- 1.5 Need for Reliability Data -- 2 Principles of Reliability Data Bases -- 2.1 Purposes -- 2.2 Construction -- 2.3 Data Acquisition -- 2.4 Physical Implementation -- 2.5 Development and Operation -- 3 Analysis Methodologies -- 3.1 Restrictions Owing to Data Base Assumptions -- 3.2 Constant Fault-Rate or Failure-Rate Methods -- 3.3 Non-Constant Fault-Rate Methods; The Weibull Distribution -- 3.4 More General Data Structures -- 4 Some Achievements Due to the Development of Data Banks -- 4.1 Introduction -- 4.2 The Nuclear Industry -- 4.3 Aircraft Industry -- 4.4 Electronics Industry -- 4.5 Chemical Industry -- 4.6 Data -- 4.7 Computational Considerations -- 4.8 Data Needs or Requirements -- 4.9 Other Factors Worthy of Consideration -- 4.10 Staffing -- 5 Facts: Most Comprehensive Information System For Industrial Safety -- 5.1 Introduction -- 5.2 The TNO Organization -- 5.3 Looking Back on the Start of FACTS -- 5.4 Information Handling -- 5.5 Cause Classification -- 5.6 Data Base Structure -- 5.7 Storage of Original Documents -- 5.8 Applications and the Use of FACTS -- 5.9 New Advances in FACTS -- 5.10 Latest Developments -- 5.11 PC-FACTS -- 6 Reliability Data Collection In Process Plants -- 6.1 General Remarks -- 6.2 Data Collection -- 6.3 Data Treatment and Examples -- 6.4 Uncertainty, Applicability and Caution -- 7 The Centralized Reliability Data Organization (Credo); an Advanced Nuclear Reactor Reliability, Availability, and Maintainability Data Bank and Data Analysis Center -- 7.1 The Basis for CREDO -- 7.2 CREDO—An Historical Perspective -- 7.3 Data Initially Identified for Inclusion -- 7.4 CREDO Component Description and Classification -- 7.5 Design of Data Input -- 7.6 CREDO’S Data Base Management System -- 7.7 Statistical Data Analysis and Processing -- 7.8 CREDO Development Experience -- 7.9 Achievements and Future Directions of CREDO -- 8 The Fabrication Reliability Data Analysis System Dante-QC1 -- 8.1 Introduction -- 8.2 Concept of the DANTE Code System -- 8.3 Data Base Configuration -- 8.4 Processing Function -- 8.5 Application of DANTE for PIE Data Analysis -- 8.6 Future Directions -- 9 Reliability Data Banks at Electricite De France (EDF) -- 9.1 The Origins -- 9.2 History and Objectives of the EDF Data Banks -- 9.3 SRDF -- 9.4 Conclusion -- 10 IAEA’s Experience In Compiling A Generic Component Reliability Data Base -- 10.1 Introduction -- 10.2 IAEA’s Generic Component Reliability Data Base -- 10.3 Problem Areas Connected with Generic Data Bases -- 10.4 Conclusion -- Appendix: Data Sources Included in the Generic Component Reliability Data Base -- 11 The European Reliability Data System—Erds: Status And Future Developments -- 11.1 Introduction -- 11.2 General Description of ERDS -- 11.3 The Component Event Data Bank (CEDB) -- 12 Development of A Large Data Bank -- 12.1 Introduction -- 12.2 The Data Bank System -- 12.3 Student Collection Scheme -- 12.4 The Item Inventory -- 12.5 Coded Storage -- 12.6 Output Data -- 12.7 Generic Reliability Data Output Enquiry and Reply Service -- 12.8 Reliability Improvements -- 13 Reliability Data Banks—Friend, Foe or A Waste of Time? -- 13.1 Introduction -- 13.2 The Personalities -- 13.3 The DataBase Design -- 13.4 The Component Inventory Data -- 13.5 The Component History Data -- 13.6 Dependent Failures -- 13.7 Data Analysis -- 13.8 Pooled Reliability Data -- 13.9 The Successes -- 13.10 Conclusions -- 14 Developments -- 14.1 Introduction -- 14.2 Changes in Data Handling -- 14.3 Data Base Software -- 14.4 Methodology and Technology Led Changes -- 14.5 New Data Bases -- 14.6 R & M 2000 -- 14.7 Changes in Attitude -- 15 Overview; Into the Future -- 15.1 Forty Years of Always Being Wrong and Always Being Right -- 15.2 The Next Forty Years -- 15.3 Using External Data Sources and Making Up Data -- 15.4 Justifying a Reliability Data Base.

Kurzfassung: 1 The importance of blood-sucking insects -- 1.1 The importance of blood-sucking insects -- 2 The evolution of the blood-sucking habit -- 2.1 Prolonged close association with vertebrates -- 2.2 Morphological pre-adaptation for piercing -- 3 Feeding preferences of blood-sucking insects -- 3.1 Host choice -- 3.2 Host choice and species complexes -- 4 Location of the host -- 4.1 The behavioural framework of host location -- 4.2 Appetitive searching -- 4.3 Activation and orientation -- 4.4 Attraction -- 4.5 Movement between hosts -- 5 Ingestion of the blood meal -- 5.1 Vertebrate haemostasis -- 5.2 Insect anti-haemostatic factors -- 5.3 Probing stimulants -- 5.4 Phagostimulants -- 5.5 Mouthparts -- 5.6 Blood intake -- 6 Managing the blood meal -- 6.1 Midgut anatomy -- 6.2 The blood meal -- 6.3 Gonotrophic concordance -- 6.4 Nutrition -- 6.5 Host hormones in the blood meal -- 6.6 Partitioning of resources from the blood meal -- 6.7 Autogeny -- 7 Host—insect interactions -- 7.1 Insect distribution on the surface of the host -- 7.2 Morphological specializations for life on the host -- 7.3 Host immune responses to insect salivary secretions -- 7.4 Behavioural defences of the host -- 7.5 Density-dependent effects on feeding success -- 8 Transmission of parasites by blood-sucking insects -- 8.1 Transmission routes -- 8.2 Specificity in vector—parasite relationships -- 8.3 Origin of vector—parasite relationships -- 8.4 Parasite strategies for contacting a vector -- 8.5 Parasite strategies for contacting a host -- 8.6 Vector pathology caused by parasites -- 8.7 Insect defence mechanisms -- 9 The blood-sucking insect groups -- 9.1 Insect classification -- 9.2 Phthiraptera -- 9.3 Hemiptera -- 9.4 Siphonaptera -- 9.5 Diptera -- 9.6 Other groups -- References.

Kurzfassung: Blood-sucking insects are the vectors of many of the most debilitating parasites of man and his domesticated animals. In addition they are of considerable direct cost to the agricultural industry through losses in milk and meat yields, and through damage to hides and wool, etc. So, not surprisingly, many books of medical and veterinary entomology have been written. Most of these texts are organized taxonomically giving the details of the life-cycles, bionomics, relationship to disease and economic importance of each of the insect groups in turn. I have taken a different approach. This book is topic led and aims to discuss the biological themes which are common in the lives of blood-sucking insects. To do this I have concentrated on those aspects of the biology of these fascinating insects which have been clearly modified in some way to suit the blood-sucking habit. For example, I have discussed feeding and digestion in some detail because feeding on blood presents insects with special problems, but I have not discussed respiration because it is not affected in any particular way by haematophagy. Naturally there is a subjective element in the choice of topics for discussion and the weight given to each. I hope that I have not let my enthusiasm for particular subjects get the better of me on too many occasions and that the subject material achieves an overall balance.

Kurzfassung: One: The Status of Women in Higher Education -- 1. Women and higher education: Trends and perspectives -- Two: Politics and Policies in Nation States -- 2. Women’s education in the U.S.S.R.: 1950–1985 -- 3. Continuity and change in women’s access to higher education in the People’s Republic of China, 1930–1980 -- 4. Women in higher education in Africa: Access and choices -- 5. Feminist reflections on the Peruvian university politics -- 6. Public and higher education policies influencing African-American women -- 7. Educational reforms — Women’s life patterns: A Swedish case study -- 8. Public-private tendencies within higher education in Norway from a women’s perspective -- 9. Women in higher education: Effects of crises and change -- Three: Women in the Academic Workforce and the Economy -- 10. Women in the academic profession: Evolution or stagnation? -- 11. Women at the top: Female full professors in higher education in Israel -- 12. The situation of women in research universities in the United States: Within the inner circles of academic power -- 13. Influences on women’s entry into male-dominated occupations -- 14. Access, equity, and outcomes: Women students’ participation in Nigerian higher education -- 15. Study abroad: A competitive edge for women? -- 16. Gender, wages and the labour market for tertiary graduates in Australia -- Four: Looking for Alternatives in Higher Education: Women’s Studies -- 17. Feminist scholarship and the American Academy -- 18. Feminist scholarship as a vocation -- 19. Integrating women into the curriculum: Multiple motives and mixed emotions -- 20. Women’s Studies in India -- Five: Bibliography -- Women and higher education: A bibliography.

Kurzfassung: Bridging Interdisciplinary Boundaries: The Case of Kin Terms -- Dracula Conditionals and Discourse -- Grammar and Memory -- The English Stress Cycle and Interlexical Relations -- Sentential Subjects and Proper Government in Chamorro -- The Logic and Functions of the English Past and Perfect -- The Autonomy of the (Syntactic) Lexicon and Syntax: Insertion Conditions for Derivational and Inflectional Morphemes -- Conditions on Propagation of Binding Scope -- Roles and Values: The Case of French Copula Constructions -- Remarks on Phrasing and Prosodic Attachment -- On Psych Predicates -- Wanna-Contraction as Restructuring -- On Suppletion, Selection, and Agreement -- Affirmative Polarity Items and Negation in Japanese -- KARE -- Modularity and Chinese A-not-A Questions -- Pied Piping and Logical Form -- Cleft Sentences and the Territory of Information -- Against Pied Piping in LF -- Binding Properties of French EN -- Remarks on Adverbial Constituent Structure -- The Logic of kara and node in Japanese -- MA -- Verbiness and the Size of Niches in the English Auxiliary -- Extraposition and Parasitic Gaps -- Infinity Is in the Eye of the Beholder -- On One’s Own: The Semantics and Pragmatics of Reflexives -- Syntax and Downstep in Japanese -- Sentences in Texts: A Valediction for Sentence Topic -- The Cross-Linguistic Distribution of Adjective Ordering Restrictions -- Edges, Surfaces and Boundaries -- Argument Positions and Configurationality -- References -- Index of Names -- Index of Subjects.

Kurzfassung: The thirty-two papers in this collection are offered to Professor S.-Y. Kuroda by his friends, as a ge sture of their deep respect and enduring affection. One of the many ways in which Professor Kuroda has impressed us all is in the breadth of his interests and areas of expertise. He is one of those rare scholars whose work and interests span the whole range of his discipline. He is a figure of such intellectual stature that he has inspired, influenced, and encouraged researchers in an astonishing variety of projects. He continues to do so at an unslackened pace today, just as his own productivity remains vigorous. But mention of Yuki's inspiration and influence is inadequate without mention of his special humorousness, his mischievous wit, his charm and as a friend, has added a unique warmth. Knowing Yuki, and counting him quality to our lives. We who have contributed to this collection have done so in partial acknowledgement of, and gratitude for, this benign and masterful influence. The contributions to the collection reflect the range of Yuki's own interests, and cover a rich variety of approaches to the analysis of natural language. These include papers in philosophy, psychology, computer sciencel artificial intelligence, and linguistics, and, within linguistics, the entire breadth of the field: phonology, morphology, syntax, semantics, pragmatics, and computation. Though diverse in their themes, language areas, and foci, the papers are bound by their authors' common bond to Yuki.

Kurzfassung: 1.1 Research Models in Mechanical Problems for Microelectronics and Fiber Optics -- 1.2 Theoretical Modeling -- 1.3 Analytical versus Numerical Modeling -- 1.4 Interaction with Experiment -- 1.5 Theoretical Modeling in Structural Analysis -- 1.6 Historical Sketch -- 1. Basic Principles of Engineering Elasticity -- 1. General Properties of Elastic Bodies -- 2. Equations and Conceptions -- 3. A View of Solution Procedures -- 4. The Elementary Problems -- 5. Strength Theories -- 6. Two-Dimensional Problem in Rectangular Coordinates -- 7. Two-Dimensional Problem in Polar Coordinates -- 8. Torsion -- 9. Fracture Mechanics -- 10. Plasticity -- 11. Viscoelasticity -- Questions and Problems -- 2. Fundamentals of Structural Analysis -- 12. Bending of Beams -- 13. The Variational and Energy Methods, and Some General Principles of Structural Analysis -- 14. Bending of Frames -- 15. Bending of Plates -- 16. Buckling -- 17. Numerical Methods -- 18. Experimental Techniques -- Questions and Problems -- Appendix: Tables of Beam Deflections.

Kurzfassung: This book contains the fundamentals of a discipline, which could be called Structural Analysis in Microelectronics and Fiber Optics. It deals with mechanical behavior of microelectronic and fiber-optic systems and is written in response to the crucial need for a textbook for a first in-depth course on mechanical problems in microelectronics and fiber optics. The emphasis of this book is on electronic and optical packaging problems, and analytical modeling. This book is apparently the first attempt to select, advance, and present those methods of classical structural mechanics which have been or can be applied in various stress-strain problems encountered in "high technology" engineering and some related areas, such as materials science and solid-state physics. The following major objectives are pursued in Structural Analysis in Microelectronic and Fiber-Optic Systems: Identify structural elements typical for microelectronic and fiber-optic systems and devices, and introduce the student to the basic concepts of the mechanical behavior of microelectronic and fiber-optic struc­ tures, subjected to thermally induced or external loading. Select, advance, and present methods for analyzing stresses and deflections developed in microelectronic and fiber-optic structures; demonstrate the effectiveness of the methods and approaches of the classical struc­ tural analysis in the diverse mechanical problems of microelectronics and fiber optics; and give students of engineering, as well as practicing engineers and designers, a thorough understanding of the main princi­ ples involved in the analytical evaluation of the mechanical behavior of microelectronic and fiber-optic systems.

Kurzfassung: In the first BACOMET volume different perspectives on issues concerning teacher education in mathematics were presented (B. Christiansen, A. G. Howson and M. Otte, Perspectives on Mathematics Education, Reidel, Dordrecht, 1986). Underlying all of them was the fundamental problem area of the relationships between mathematical knowledge and the teaching and learning processes. The subsequent project BACOMET 2, whose outcomes are presented in this book, continued this work, especially by focusing on the genesis of mathematical knowledge in the classroom. The book developed over the period 1985-9 through several meetings, much discussion and considerable writing and redrafting. Our major concern was to try to analyse what we considered to be the most significant aspects of the relationships in order to enable mathematics educators to be better able to handle the kinds of complex issues facing all mathematics educators as we approach the end of the twentieth century. With access to mathematics education widening all the time, with a multi­ tude of new materials and resources being available each year, with complex cultural and social interactions creating a fluctuating context of education, with all manner of technology becoming more and more significant, and with both informal education (through media of different kinds) and non­ formal education (courses of training etc. ) growing apace, the nature of formal mathematical education is increasingly needing analysis.

Kurzfassung: 1 Botany -- 2 The cultivated hop -- 3 Production methods -- 4 Harvesting -- 5 Pests and diseases: historical review -- 6 Pests -- 7 Fungal diseases -- 8 Virus diseases -- 9 Varieties and breeding -- 10 The hop trade -- References.

Kurzfassung: It is 25 years since Dr Burgess wrote his invaluable book on hops and in the intervening period there have been very many advances in hop research and hop production techniques. When invited to produce a replacement for that book, therefore, the problem was not finding enough new material but deciding on what to include. People interested in reading about the hop are likely to fall into very diverse categories. Hop growers will be looking for practical advice on production methods while research workers with specialist knowledge in one field may want detailed information about research in other disciplines. In addition, there are many people for whom hops are of much more general interest and for them a source of basic information about the crop will be required. The aim has not been to produce a detailed growers' handbook, since techniques vary considerably from district to district and I believe that it is better to obtain advice from neighbouring growers or from specialist advisers than from any book. What I have attempted is to outline the basic principles upon which production methods should be based. At the same time, I have tried to include material that will be of general interest both to those who work with hops and to those to whom they might otherwise remain a complete mystery. In doing this my own personal interests have inevitably played an important part.

Kurzfassung: 1 Introduction -- Unit 1 Citrus Juice Characteristics -- 2 Brix and Soluble Solids -- 3 Acids in Citrus Juices -- 4 The Brix/Acid Ratio -- 5 Testing of Fruit Samples -- 6 Citrus Oils, Aromas, and Essences -- 7 Citrus Juice Pulp -- 8 Juice Cloud -- 9 Color of Citrus Juices -- 10 Bitterness in Citrus Juices -- 11 Nutritional Content of Citrus Juices -- 12 Citrus Rheology -- 13 Citrus Processing Varieties -- Unit 2 Citrus Juice Sanitation -- 14 Inspections -- 15 Citrus Microbiology -- 16 Insects, Rodents, and Birds -- 17 Physical and Chemical Contamination -- 18 Processing Contamination -- 19 Juice Adulteration -- Unit 3 Citrus Juice By-Products -- 20 Food-Grade Nonjuice Products -- 21 Animal Feed and Fuel By-Products -- 22 Wastes from Citrus Plants -- Unit 4 Citrus Juice Management -- 23 Quality Control Statistics -- 24 Quality Control Management -- 25 Inventory Management -- Appendix A Acid Corrections to the Brix -- Appendix B GWBASIC and RPG Programs -- Appendix C HP-41C Programmable Calculator Programs -- Appendix D Answers to Select Questions and Problems.

Kurzfassung: Citrus juices constitute the majority of the fruit juices consumed in the United States and around the world. Along with the rest of the fruit juice industry, they playa major role in the entire food industry as well. In spite of this prominence, few texts have been written on quality control technology; and most of the texts have been written by researchers who may possess great technical skill but generally are less familiar with daily routine quality control problems and con­ cerns than quality control technologists are. On the other hand, quality control technologists and managers generally do not have the time and/or the talent to write books or communicate through scientific literature. The author recognized the need for an updated, comprehensive, and easily understood text on citrus quality control. This text has been designed to be used not only by processors, bottlers, canners, and others involved in the citrus in­ dustry, but it can be of value to instructors and students of citrus technology. Researchers also can find value in the foundations laid down by the text, es­ pecially in regard to the needs and concerns of the processing industry. Also, consultants and marketing personnel will be greatly helped by understanding the concepts of this volume. Persons in related industries also will find many applications that can be easily adapted to their needs.

Kurzfassung: 1. Survey of the Existing Analysis Methods -- 1. Introduction to the Injected-Absorbed-Current Method of Analysis -- 2. Elementary Converters Operating at Constant Frequency with Duty Ratio as Controlled Quantity -- 3. General Small-Signal, Low-Frequency Analysis of Switching Regulators -- 4. State-Variables-Averaging Method -- 2. Multiple-Loop Switching Power Cells -- 5. Elementary Switching Power Cells with Inductor Current as Controlled Quantity -- 6. Multiple-Loop Switching Cells Using Inductor Voltage in a Minor Feedback Loop -- 3. Special Configurations -- 7. ?uk and SEPIC Switching Cells -- 8. Analysis of Power Cells with Duty-Ratio Control at Variable Frequency -- 9. Free-Running Hysteretic Regulator -- 4. Applications of Linear Analysis Method -- 10. Interconnection of a Power Source and a Switching Regulator -- 11. Feedforward in Switching Regulators -- 12. Parallel Operation of Switching Regulators -- 5. Selected Analytic Approaches and Applications and Future Advances in Analysis Methods -- 13. Selected Analysis Examples -- 14. High-Frequency Extension of the Linear Cell Model -- Appendixes -- Appendix 1. Additional Information for Chapter 5 -- A1-1 Derivation of Time Delay Between Control and Injected Current for Constant Off Time Current-Mode Control -- A1-2 Control-to-Output Voltage Functions of CurrentMode-Controlled Buck Converter with Three Different Control Methods -- Appendix 2. Graphical-Analytical Representation of Transfer Functions -- A2-1 Introduction -- A2-2 Transfer Functions of Passive Networks -- References -- Appendix 3. Examples and Problems -- A3-1 Introduction -- A3-2 Appendix to Chapter 2—Regulators Employing Elementary Cells, Operating at Constant Switching Frequency, and with Duty Ratio as the Controlled Quantity -- A3-3 Appendix to Chapter 14—Successive Approximations of the Cell Controlled-Quantity-to-Output-Voltage Transfer Function -- Appendix 4. Sources of Technical Information -- A4-1 Conferences -- A4-2 Periodicals -- A4-3 Compendia -- A4-4 Textbooks.

Kurzfassung: The most critical part of the modern switching-mode power supply is the regulated dc/dc converter. Its dynamic behavior directly determines or influences four of the important characteristics of the power supply: • Stability of the feedback loop • Rejection of input-voltage ripple and the closely-related transient re­ sponse to input-voltage perturbation • Output impedance and the closely-related transient response to load perturbation • Compatibility with the input EMI filter Due to the complexity of the operation of the converter, predicting its dynamic behavior has not been easy. Without accurate prediction, and depending only on building the circuit and tinkering with it until the operation is satisfactory, the engineering cost can easily escalate and schedules can be missed. The situation is not much better when the circuit is built in the computer, using a general-purpose circuit-simulation program such as SPICE. (At the end of this book is a form for obtaining information on a computer program especially well suited for dynamic analysis of switching-mode power converters: DYANA, an acronym for "DYnamic ANAlysis. " DYANA is based on the method given in this book. ) The main goal of this book is to help the power-supply designer in the prediction of the dynamic behavior by providing user-friendly analytical tools, concrete results of already-made analyses, tabulated for easy application by the reader, and examples of how to apply the tools provided in the book.

Kurzfassung: Over the last 20 years there have been a large number of technical advances and changes in the field of educational and psychological testing. According to Anne Anastasi, The decade of the 1980's has been a period of unusual advances in ,psychological testing. Technological progress, theoretical sophistication, and increasing pro­ fessional responsibility are all evident in the fast-moving events in this field (A. Anastasi, Psychological Testing, Sixth Edition. New York: Macmillan, 1988). On the psychometric front, advances in topics such as item response theory, criterion-referenced measurement, generalizability theory,· analy­ sis of covariance structures, and validity generalization are reshaping the ways that ability and achievement tests are constructed and evaluated, and that test scores are interpreted. But \Jsychometric advances, as substantial and important as they have been, are only a fraction of the major changes in the field of testing. Today, for example, the computer is radically chang­ ing the ways in which tests are constructed, administered, and scored. Computers are being used to administer tests "adaptively." That is, the sequence of questions an examinee is administered depends upon his or her performance on earlier administered items in the test. Tests are "adapted" to the ability levels of the examinees who are being assessed. One result is shorter tests with little or no loss in measurement precision. Computers are also being used to store or bank test items. Later, items of interest can be selected, and the computer is used to print copies of the test.

Kurzfassung: 1. Introduction to Cleanroom Technology -- The Need for Cleanrooms -- An Overview of Semiconductor Technology -- Other Cleanroom Applications -- The Impact of Cleanroom Technology -- 2. Microcontamination -- Types of Contamination -- Sources of Contamination -- Effects of Contamination -- Summary -- 3. Controlled Environment Concepts -- Performance Considerations -- Performance Standards -- Parameter Measurement -- Summary -- 4. Creating Clean Areas -- Construction Materials and Techniques -- Air Filtration -- Airflow -- Equipment and Material Decontamination -- Bringing Items into the Cleanroom -- Summary -- 5. Cleanroom Layout -- Mixed Flow Rooms -- Local Unidirectional Flow -- Modular Cleanrooms -- Tunnel Cleanrooms -- Total Vertical Laminar Flow -- Horizontal Laminar Flow -- Process Equipment -- Designing for Cleanroom Class -- Summary -- 6. Preconditioning, Control, and Static -- Air Handling Systems -- Fans and Air Control -- Static -- Summary -- 7. Site and Structural Considerations -- Vibration -- Site Selection -- Structure -- Internal Vibration Engineering -- Summary -- 8. Cleanrooms, Codes, and Legislation -- Principal Codes -- Fire Protection -- Legislation -- Summary -- 9. Ultrapure Water -- The Need for Ultrapure Water -- Constituents of Raw Water -- Purification Techniques -- RO/DI System Configurations -- Operational Considerations -- Summary -- 10. Production Materials -- Gases -- Wet Chemicals -- Handling Other Materials -- Summary -- 11. Personnel and Contamination -- Apparel -- Use of Apparel -- Work Practices -- Summary -- 12. Safety Issues -- Properties of Hazardous Production Materials -- Cleanroom Safety Practices -- Safety Equipment -- Handling Hazardous Production Materials -- Summary -- 13. The Future of Controlled Environments -- Advanced Cleanroom Concepts -- Enclosed Transfer Systems -- Robotics and Automation -- In-situ Processing -- Epilog—The Cleanroom as a System -- Appendix 1 Federal Standard 209D -- Appendix 2 Simplified Cleanroom Certification Procedure -- Appendix 3 Program and Sample Output.

Kurzfassung: In writing this book, our goal was to produce a much needed teaching and reference text with a fresh approach to c1eanroom technology. The most obvious technological reason for bringing this book into being is that c1ean­ rooms have become vital to the manufacture and development of high­ technology products in both the commercial and military sectors, and there­ fore people have to develop an understanding of them. Examples of c1ean­ room applications include the manufacture of integrated circuits and other electronic components, preciSion mechanical assemblies, computer disks and drives, compact disks, optical components, medical implants and prostheses, pharmaceuticals and biochemicals, and so on. The book is written for anyone who is currently involved, or intends to become involved, with c1eanrooms. We intend it to be used by a wide range of professional groups including process engineers, production engineers, plant mechanical and electrical engineers, research engineers and scientists, managers, and so on. In addition, we believe it will be beneficial to those who design, build, service, and supply c1eanrooms, and may be used as a training aid for students who intend to pursue a career involving controlled environments and others such as c1eanroom operators and maintenance staff. We have attempted to steer clear of complex theory, which may be pursued in many other specialist texts, and keep the book as understandable and applicable as possible.

Kurzfassung: I. Modeling Consumer Demand for Food Safety and Nutrition -- 1. Consumer Demand for Food and Food Safety: Models and Applications -- 2. Modeling the Effect of Risk on Food Demand and the Implications for Regulation -- 3. A Model of the Demand and Supply of the Health Effects of Food Substances -- II. Application of Risk Assessment Methodology to Food Safety -- 4. Modeling Chronic Versus Acute Human Health Risk from Contaminants in Food -- 5. Conservatism in Risk Assessment and Food Safety Policy -- 6. Risk Assessment for Estimating the Economic Costs of Foodborne Disease Caused by Microorganisms -- 7. An Economic Framework for Assessing Foodbome Disease Control Strategies with an Application to Salmonella Control in Poultry -- III. Measurement of Consumer Response to Safety and Health Information -- 8. The Impact of Health Risk Information on Food Demand: A Case Study of Alar and Apples -- 9. Consumers’ Perceptions of Risks from Pesticide Residues and Demand for Certification of Residue-Free Produce -- 10. Consumer Reaction to the Introduction of Bovine Somatotropin -- 11. Information, Advertising, and Health Choices: A Study of the Cereal Market -- 12. Assessing the Effects of Diet/Health Awareness on the Consumption and Composition of Fat Intake -- IV. Analysis of the Supply of Food Safety -- 13. Firm Strategic Response to Food Safety and Nutrition Regulation -- 14. A Model of Firm Costs of Compliance with Food Labeling Regulations -- 15. An Economic Model of FDA’s Imported Foods Enforcement Program.

Kurzfassung: Public concern about the safety and healthfulness of the food supply grew markedly during the 1980s. Numerous government, academic, interest group, and media reports questioning the adequacy of the food safety regulatory system formed the basis for this increase in concern. While public concern focused most directly on pesticide residues in food, scientists emphasized the risks of illness associated with microbiological contamination of food. Much additional attention was focused on the food supply as a result of the striking consensus on dietary recommendations that emerged in the late 1980s based on increased scientific knowledge of linkages between diet and health. Relatively little research on the economic aspects of food safety and nutrition issues had been conducted up to the mid-1980s. These aspects are complex. On the consumer demand side, they include consumers' perceptions of the risks associated with particular food products, how demographic characteristics influence consumers' processing of risk information and subsequent changes in food demand behavior, and the monetary value consumers might place on changes in the risk profiles of products. The economic benefits and costs associated with current food consumption patterns are a major determinant of demand for improved food safety and dietary change through government regulation. While a more complete picture of risks, benefits, and costs has been emerging recently, much is yet unknown.

Kurzfassung: Reductionism as Negation of the Scientific Spirit -- The Power and Limits of Reduction -- Theory of Antireductionist Arguments:The Bohr Case Study -- A Short History of Emergence and Reductionism -- The Technical Problem of “Full Abstractness” as a Model for an Issue in Reductionism -- A Neutral Reduction: Analytical Method and Positivism -- Reductionism and Reduction in Logic and in Mathematics -- Reductionism in Biology -- Reductionism: Palaver without Precedent -- Must a Science of Artificial Intelligence be Necessarily Reductionist? -- Can Psychological Software be Reduced to Physiological Hardware? -- On the Problem of Reducing Value-Components in Epistemology -- Index Of Names.

Kurzfassung: The topic to which this book is devoted is reductionism, and not reduction. The difference in the adoption of these two denominations is not, contrary to what might appear at first sight, just a matter of preference between a more abstract (reductionism) or a more concrete (reduction) terminology for indicating the same sUbject matter. In fact, the difference is that between a philosophical doctrine (or, perhaps, simply a philosophical tenet or claim) and a scientific procedure. Of course, this does not mean that these two fields are separated; they are only distinct, and this already means that they are also likely to be interrelated. However it is useful to consider them separately, if at least to better understand how and why they are interconnected. Just to give a first example of difference, we can remark that a philosophical doctrine is something which makes a claim and, as such, invites controversy and should, in a way, be challenged. A scientific procedure, on the other hand, is something which concretely exists, and as such must be first of all described, interpreted, understood, defined precisely and analyzed critically; this work may well lead to uncovering limitations of this procedure, or of certain ways of conceiving or defining it, but it does not lead to really challenging it.

Kurzfassung: The Rhetoric of Rights and Justice in Health Care -- The Rhetoric of Rights and Justice in Health Care -- Rights to Health Care: The Development of the Concept -- The Right to Health Care: Reflections on Its History and Politics -- The Right to Health Care: Presentation and Critique -- The Right to Health Care in a Capitalistic Democracy -- Justice and the Right to Health Care: An Egalitarian Account -- Rights to Health Care: Created, Not Discovered -- Why the Right to Health Care is Not a Useful Concept for Policy Debates -- A Qualified Right to Health Care: Toward a Notion of a Decent Minimum -- Rights, Reforms, and the Health Care Crisis: Problems and Prospects -- Rights, Obligations, and the Special Importance of Health Care -- Access to Health Care: Charity and Rights -- Equality, Free Markets, and the Elderly -- Equal Opportunity and Health Care Rights for the Elderly -- Free Markets, Consumer Choice, and the Poor: Some Reasons for Caution -- My Right to Care for my Health — And What About the Needy and the Elderly? -- Health Care as a Commodity -- Should Medicine be a Commodity? An Economist’s Perspective -- The Profit Motive in Kant and Hegel -- Virtue for Hire: Some Reflections on Free Choice and the Profit Motive in the Delivery of Health Care -- Rights, Public Policy, and the State.

Kurzfassung: Human existence is marked by pain, limitation, disability, disease, suffering, and death. These facts of life and of death give ample grounds for characterizing much of the human condition as unfortunate. A core philosophical question is whether the circumstances are in addition unfair or unjust in the sense of justifying claims on the resources, time, and abilities of others. The temptation to use the languages of rights and of justice is und- standable. Faced with pain, disability, and death, it seems natural to complain that "someone should do something", "this is unfair", or "it just isn't fight that people should suffer this way". Yet it is one thing to complain about the unfairness of another's actions, and another thing to complain about the unfairness of biological or physical processes. If no one is to blame for one's illness, disability, or death, in what sense are one's unfortunate circumstances unfair or unjust? How can claims against others for aid and support arise if no one has caused the unfortunate state of affairs? To justify the languages of fights to health care or justice in health care requires showing why particular unfortunate circumstances are also unfair, in the sense of demanding the labors of others. It requires understanding as well the limits of property claims. After all, claims regarding justice in health care or about fights to health care limit the property fights of those whose resources will be used to provide care.

Kurzfassung: One time, Historicity, Culture -- Husserl and Historicism: Fifty Years Later -- The Teleology of the Historical Being in Hartmann and Husserl -- Historical Time, Mind, and Critical Philosophy of History -- Does Man Co-Create Time? -- The Reactivation of the Past as an Ethical Demand on the Phenomenologist -- Hartmann: The Historicity of Cultural Data -- Hombre y Civilizatión: 1492, La Educatión Imposible -- Phenomenology as a Theory of Culture -- Two Husserlian and Posthusserlian Approaches to Aesthetics -- The Methodological Foundations of Phe-nomenological Aesthetics -- Bild und Kunst im Husserls Nachlass -- Aesthetic Concepts of a Phenomeno-logical Origin -- A Poet’s Life and Work in the Perspective of Phenomenology -- On the Quasi-Intentional Nature of Represented Objects in a Film Work of Art -- Three The Life-Significance of Literature and its Interpretation -- Tymieniecka’s Vindication of the Life Significance of Literature. Homo Ludens and Homo Creator: Scapino -- The Enigma of Avant-Gardes -- Phenomenology and the Pragmatics of Literary Realism -- The Reader and the Reality of the Literary Text: Towards the Construction of Aesthetic Meaning -- Art as Communication -- Phenomenology and the Reception of Literary Texts: The Implied Reader as an Element of a Genre -- L’Oeuvre Litteraire, La Construction Interieure et la Reconstruction -- The Hundredlettered Name: Thunder in James Joyce’s Finnegans Wake -- Refiguring Nature: Tropes of Estrangement in Contemporary American Poetry -- Four Metaphysical Issues in Aesthetics -- Anti-Metaphysical Thinking on Art (Heidegger and Merleau-Ponty) -- The Sense of Possibility: On the Ontologico-Eidetic Relevance of the Character (The Experimental Ego) in Literary Experience -- Truth and Untruth in the Museum Exhibition -- Nihilism and Noesis: The Contribution of Phenomenology to the Sartrean Analysis of Flaubert -- Goethe and Schopenhauer: A Phenomenology of the Final Vision in Faust II -- The Tagorean Interpretation of “Ami”: Man’s Self-Esteem -- The Magic of Art in the Magic-Less World -- El Problema Einailogico -- Index of Names.

Kurzfassung: This collection is the final volume of a four book survey of the state of phenomenology fifty years after the death of Edmund Husserl. Its publication represents a landmark in the comprehensive treatment of contemporary phenomenology in all its vastness and richness. The diversity of the issues raised here is dazzling, but the main themes of Husserl's thought are all either explicitly treated, or else they underlie the ingenious approaches found here. Time, historicity, intentionality, eidos, meaning, possibility/reality, and teleology are the main concerns of this collection devoted to studies in aesthetics, metaphysics and literary interpretation, written by such authors as, among others, R. Cobb-Stevens, C. Moreno Marquez, J. Swiecimski, Sitansu Ray and M. Kronegger. These original studies of phenomenological aesthetics and literary theory by scholars from all parts of the world were gathered by the World Institute for Advanced Phenomenological Research and Learn­ ing during the year 1988/89 during its assessment of the phenomeno­ logical movement, fifty years after Husserl's death. IX A -T. Tymieniecka (ed.), Analecta Husserliana, Vol. XXXVII, ix.

Kurzfassung: I. Introduction Parsing strategies -- II. Experiment 1: Declaratives With Post-Verbal Subject -- III. Experiment 2: The Cost of Chains in Parsing: Processing Declaratives With Unaccusative or Unergative Verbs -- IV. Experiment 3: Referential and Non-Referential Wh-Dependencies -- V. Experiment 4: Wh-Questions with Post-Clausal Disambiguation -- VI. Experiment 5: The Minimal Chain Principle and the Grammar of the Langauge -- VII. General Discussion -- Appendices -- Material, Experiment 1 -- Material, Experiment 2 -- Material, Experiment 3 -- Material, Experiment 4 -- Material, Experiment 5 -- Index of Subjects -- Index of Authors.

Kurzfassung: 1 Introduction -- 1.1 Historical Development of Satellites -- 1.2 Communication Satellite Systems -- 1.3 Communication Satellites -- 1.4 Orbiting Satellites -- 1.5 Satellite Frequency Bands -- 1.6 Satellite Multiple-Access Formats -- References -- Problems -- 2 Modulation, Encoding, and Decoding -- 2.1 Analog Modulation -- 2.2 Analog FM Carriers -- 2.3 Digital Encoding -- 2.4 Spectral Shaping -- 2.5 Digital Decoding -- 2.6 Error-Correction Decoding -- 2.7 Block Waveform Encoding -- 2.8 Digital Throughput -- References -- Problems -- 3 The Satellite Channel -- 3.1 Electromagnetic Field Propagation -- 3.2 Antennas -- 3.3 Atmospheric Losses -- 3.4 Receiver Noise -- 3.5 Carrier-to-Noise Ratios -- 3.6 Satellite Link Analysis -- 3.7 Dual Polarization -- 3.8 Effect of Depolarization on Dual Polarized Communications -- 3.9 Spot Beams in Satellite Downlinks -- References -- Problems -- 4 Satellite Electronics -- 4.1 The Transponder Model -- 4.2 The Satellite Front End -- 4.3 RF Filtering of Digital Carriers -- 4.4 Satellite Signal Processing -- 4.5 Frequency Generators -- 4.6 Transponder Limiting -- 4.7 Nonlinear Satellite Amplifiers -- References -- Problems -- 5 Frequency—Division Multiple Access -- 5.1 The FDMA System -- 5.2 Nonlinear Amplification with Multiple FDMA Carriers -- 5.3 FDMA Nonlinear Analysis -- 5.4 FDMA Channelization -- 5.5 AM/PM Conversion with FDMA -- 5.6 Satellite-Switched FDMA -- References -- Problems -- 6 Time-Division Multiple Access -- 6.1 The TDMA System -- 6.2 Preamble Design -- 6.3 Satellite Effects on TDMA Performance -- 6.4 Network Synchronization -- 6.5 SS-TDMA -- References -- Problems -- 7 Code-Division Multiple Access -- 7.1 Direct-Sequence CDMA Systems -- 7.2 Code Generation for DS-CDMA Systems -- 7.3 Performance of DS-CDMA Systems -- 7.4 Combined Error Correction and Code Addressing in DS-CDMA -- 7.5 Antijam Advantages of Direct Code Addressing -- 7.6 Satellite Jamming with DS-CDMA -- 7.7 DS-CDMA Code Acquisition and Tracking -- References -- Problems -- 8 Frequency-Hopped Communications -- 8.1 The Frequency-Hopped System -- 8.2 Frequency-Hopping Synthesizers -- 8.3 Performance of Frequency-Hopped Systems -- 8.4 Frequency-Hopped CDMA Systems -- 8.5 Jamming in Frequency-Hopped Systems -- 8.6 Code Acquisition and Tracking in FH Systems -- References -- Problems -- 9 On-Board Processing -- 9.1 On-Board Processing Subsystems -- 9.2 Baseband Digital Decoding -- 9.3 Data Reclocking, Routing, and Multiplexing -- 9.4 TDM-FDM Conversion -- 9.5 On-Board Remodulation -- 9.6 On-Board Baseband Processing with Beam Hopping -- 9.7 Multiple Spot Beaming -- 9.8 Photonic On-Board Processing -- References -- Problems -- 10 Satellite Crosslinks -- 10.1 The Crosslink System -- 10.2 Crossline Power Budget -- 10.3 Coherent and Noncoherent Communications at EHF -- 10.4 Autotracking -- 10.5 Autotrack Loop Analysis -- 10.6 Effect of Autotract Pointing Errors on PE -- 10.7 Optical Crosslinks -- References -- Problems -- 11 VSAT and Mobile-Satellite Systems -- 11.1 VSAT-Satellite-System Concept -- 11.2 Small-Terminal-Satellite Link Analysis -- 11.3 VSAT and Hub Networks -- 11.4 Direct Home TV Broadcasting -- 11.5 The Mobile-Satellite Channel -- 11.6 Communicating over the Mobile-Satellite Channel -- 11.7 Interleaving to Combat Deep Fading -- 11.8 Combined Coding and Modulation for the Mobile Channel -- References -- Problems -- Appendices -- A Review of Digital Communications -- A.1 Baseband Digital Waveforms -- A.2 BPSK Systems -- A.3 QPSK Carrier Waveform -- A.4 FSK -- A.5 DPSK -- A.6 MPSP -- A.7 Correlation Detection of Orthogonal BPSK -- A.8 MFSK -- A.9 Effect of Phase Noise on Noncoherent FSK and DPSK Systems -- A.10 MASK -- References -- B Carrier Recovery and bit Timing -- B.1 Carrier Recovery -- B.2 BPSK Carrier Recovery -- B.3 QPSK Carrier Referencing -- B.4 MPSK Carrier Referencing Systems -- B.5 Bit Timing -- References -- C Satellite Ranging and Position Location Systems -- C.1 Ranging Systems -- C.2 Component Range Codes -- C.3 Tone-Ranging Systems -- C.4 Position Locating and Navigation -- D Nonlinear Amplification of Carrier Waveforms.

Kurzfassung: This second edition of Satellite Communications is a revised, updated, and improved version of the first edition (Van Nostrand, 1984) and has been extended to include many newer topics that are rapidly becoming important in modem and next-generation satellite systems. The first half of the book again covers the basics of satellite links, but has been updated to include additional areas such as Global Positioning and deep space satellites, dual polarization, multiple beaming, advanced satellite electronics, frequency synthesizers, and digital frequency generators. The second half of the book is all new, covering frequency and beam hopping, on-board processing, EHF and optical cross­ links, and mobile satellites and VSAT systems. All of these latter topics figure to be important aspects of satellite systems and space platforms of the twenty-first century. As in the first edition, the objective of the new edition is to present a unified approach to satellite communications, helping the reader to become familiar with the terminology, models, analysis procedures, and evolving design directions for modem and future satellites. The presentation stresses overall system analysis and block diagram design, as opposed to complicated mathematical or physics descriptions. (Backup mathematics is relegated to the appendices where a reader can digest the detail at his own pace. ) The discussion begins with the simplest satellite systems and builds to the more complex payloads presently being used.